Skip to content

From the INS archive · Published 31 March 1998

This release is shown as originally published. Names, products, figures and contact details reflect that time.

ABB Industry Oy

New microdrive from ABB

/INS · 31 March 1998
10 languages
A variable speed AC microdrive with the functions and communication facilities comparable to larger drives has been launched by ABB. Covering 0.37kW to 2.2kW, 200V to 480V, in single and three phase, the ACS 140 offers Modbus, serial communications, two relay outputs and two analogue inputs. Features include built-in PID control, flying start on a spinning load, seven application macros for fast programming and configuration and dynamic braking for accurate stopping.

Due to its high repeatability, the ACS 140 improves
end-product quality and output by controlling processes within narrow tolerances, says ABB. The inaccuracy in the microdrive's analogue input is less than 1%, giving accurate speed control and consistent performance.
For accurate process control, the microdrive responds in 9 milliseconds to input signals. There is little delay between the drive receiving an instruction and the motor shaft speed being adjusted. On cutting machines, for example, this precise control ensures the blade is in the correct position at the correct time and so reduces waste caused by inaccurate cutting of the metal or wood.
Mounting the ACS 140 can be in one of three ways: flange, panel or DIN rail. Flange mounting allows the drive to be installed with the heat sink outside the panel or machine. This enables more units to be packed into a smaller space and increases the reliability of the drive electronics by separating them from the heat generated.
Both single and three phase models, across all power ratings, are only 80mm wide, giving the ACS 140 one of the smallest footprints on the market.
No control panel is needed as many parameters are pre-set. For complex applications that need many parameters to be set, a small control panel is available which clips onto the front of the microdrive. Set-up times are cut for users of several ACS 140 units with the panel's parameter copy and paste facility.


For further information:
ABB Industry (Pty) Ltd
David V. Sheldon
P.O. Box 11494
1457 Randhart, South Africa
Tel: +27 11 567 5340
Fax: +27 11 9080 2061
http://www.abb.com/vsd

ABB Elektrik Sanayi A.S.
Fatih Yalcin
P.K. 3 Yukari Dudullu Imes, Umaraniye
81260 Istanbul, Turkey
Tel: +90 216 3652900
Fax: +90 216 3652944
http://www.abb.com/vsd

ABB S.R.O.
Vladimir Lexa
Vinohradska 184
13052 Prague 3, Czech Republic
Tel: +420 2 6713 2387
Fax: +420 2 6713 2384
http://www.abb.com/vsd

Asea Brown Boveri Ltd
Ivan Bucska
Vaci ut 152 - 156
1138 Budapest, Hungary
Tel: +36 1 2701555
Fax: +36 1 2698723
http://www.abb.com/vsd

Asea Brown Boveri
Josef Magic
Sladkovicova 54
97401 Banska Bystrica, Slovakia
Tel: +421 88 62324
Fax: +421 88 62325
http://www.abb.com/vsd

S.A. ABB N.V.
Nadine Meesen
Hoge Wei 27
1930 Zaventem, Belgium
Tel: +32 2 718 66 72
Fax +32 2 718 64 40
http://www.abb.com/vsd

New microdrive from ABB
New microdrive from ABB
About this release
  • Originally published on ins-news.com at /en/100/140/831/new-microdrive-from-abb-metals-medical-technology.htm.
  • Shown from the INS archive as it was published.

More from ABB Industry Oy

ABB Industry Oy18 March 1998

Enhanced performance for motor drive system

The first ever drive system incorporating Direct Torque Control (DTC) inverters on a common DC bus has been launched by ABB. The ACS 600 MultiDrive uses DTC to give excellent performance with or without pulse encoder on demanding applications, such as rollers and conveyors in the paper and metals in

From the INS archiveENDEESFIFRITNBNLPTSV
ABB Industry Oy2 June 1998

Software for drive commissioning and maintenance

Two new software packages from ABB are set to make commissioning, monitoring and process control of the company's ACS 600 AC drives as straight forward as operating a mouse, claims the company. DriveWindow simplifies commissioning and DriveLink allows ACS 600 drives to be controlled via Windows appl

From the INS archiveENDADEESFIFRITNLPT
ABB Industry Oy16 July 1998

Extended DTC drives range

ABB's ACS 600 SingleDrive range of variable speed AC drives has been extended from 630kW to 3MW. The power range starts at 2.2kW. This is the market's widest range of AC drives based on Direct Torque Control (DTC) technology, according to ABB.

From the INS archiveENDADEESFIFRITNBNLPTSV