From the INS archive · Published 14 April 1999
This release is shown as originally published. Names, products, figures and contact details reflect that time.
"Compact" Motor for Augers
/INS · 14 April 1999Hagglunds Drives' hydraulic drive systems offer an alternative to traditional gearbox drive systems in earth auger applications. In addition to their ability to deliver high power from a compact unit, problems of electrical insulation often encountered in conventional gearbox systems can be avoided.
The "Compact" motors operate as a direct drive with no gears. They can deliver full torque upon starting and offer simple load control. Normally the motor is attached directly onto the drive shaft or winch drum. The 110mm diameter through hole in the centre of the motor enables, for instance fluids to be channeled through.
- The unit is easy to install and incorporate into any design, says Ingemar Borg, Business Area Manager at Hagglunds Drives
One of the features of the design is that the auger can be fully controlled across its entire speed range. The motor can also provide full torque from standstill to maximum rotational speed.
This line of motors has a power to weight ratio of around 1.5 to 2.0 kW/kg (0.9 -1.2 Hp/lb) which is three to four times higher than today's industry standard for motors in the 100-600 kW (135-820 Hp) range.
Caption: With a large through hole - 110mm diameter- in the centre, the Hagglunds Drives' "Compact" motor is easy to incorporate into any design, for example on a D.T.H Drilling Machine.
For more information please contact:
Ingemar Borg, Business Area Manager
Hagglunds Drives AB
SE-890 42 Mellansel, Sweden
Tel: +46 660 870 00
Fax: 46 660 871 60
E-mail: ingemar.borg@se.hagglunds.com
About this release
- Originally published on ins-news.com at /en/100/562/1585/compact-motor-for-augers-health-technology.htm.
- Shown from the INS archive as it was published.