From the INS archive · Published 23 February 2001
This release is shown as originally published. Names, products, figures and contact details reflect that time.
Ultra-compact servo motor with built-in coupling simplifies design
/INS · 23 February 2001 Hanover Trade Fair
23-28 April 2001
Hall 12, stand F06/6
The new servo motor concept, devised by the Swedish company High Density Drives AB, is a further development of their Stritorque shaft-equipped servo motor.
"This compact motor has a torque/volume ratio of an incredible 6.8 Nm per litre," says Rolf Ohlsson, the company's Marketing Manager. "Eliminating the coupling housing means there are fewer parts to be designed into the machinery of which it will form a part. This simplifies the logistics and reduces the manufacturer's costs. The motor can also be used to modify existing machinery."
The light Coupmotor is said to have aroused great interest in the packaging, missile, aviation and space industries, and is already in use by several large companies. The motor's small size and low heat generation also make it suitable for clean room areas, where every square metre is expensive and the ventilation system costs are high.
Two versions
"The servo motor is available in two versions, of 62 and 89 millimetre length, and despite its compact dimensions has the same performance (5 Nm at 3 000 rev/min) as conventional servo motors that are six times larger," continues Rolf Ohlsson. "No new drive electronics are required; all the most modern drive systems can be used. The motors are normally delivered complete with resolvers or encoders, but can also be equipped with high resolution feedback, in accordance with SinCos and EnDAT standards."
The motors have three different coupling types, all with a metal bellows and two different bellows lengths. One type of coupling uses an expanding shaft and the other has a clamping screw for connection to machine shafts of 5-20 millimetres diameter. The third version has two stop screws and will fit shafts of 6-28 millimetres diameter.
The company's Web site includes a simple and self-explanatory formula. The customer can enter the key data to receive proposals for various servo motor alternatives, depending on the desired torque range, and also sees a sketch of the appropriate motor with its specifications.
High Density Drives develops solutions and applications for high-torque motors. The motors, which are assembled in Sweden, are based on a new principle for the location of the iron and copper stator components.
For further information, please contact:
High Density Drives AB, Rolf Ohlsson
Stallarholmsvägen 40, SE-124 59 Bandhagen, Sweden.
Tel: +46 (0)8-86 87 80. Fax: +46 (0)8-99 51 53.
E-mail: rolf.ohlsson@hdd.se. Home page: www.hdd.se
About this release
- Originally published on ins-news.com at /en/100/591/1196/ultra-compact-servo-motor-with-built-in-coupling-simplifies-design-mining-and-quarrying.htm.
- Shown from the INS archive as it was published.